Monday, November 15, 2010

Dimsport Rapid Diesel Module

The additional RAPID control unit is a new concept of electronic module that optimizes and increases up to 25% the performances of torque and power of the modern turbo diesel engines, in compliance with the stricter regulations on pollution.

It works by correcting the signals coming from the engine control unit towards the injection system, with the possibility of regulating it safely and autonomously.

Installing a Rapid module is a simple and rapid operation. It is sufficient to connect the wiring supplied in the kit to the vehicle's power-points (injectors, injection pump connector, etc.) by bypassing the original wiring of the engine.

To realize some quality interfaces between additional module and vehicle, some original connectors and parts of the manufacturers, when available on the market, are used.

Thanks to a special console, during the installation the operator can modify the Rapid calibrations to better respond to the customer's needs. We also remind you that by means of a switch it is always possible to commute from original power to modified power from the driver's compartment.

The product versatility, combined with its very easy installation, make RAPID an extremely desirable product for drivers who can, depending on the type of road, get with a simple operation a sudden increase of torque and power and optimize the fuel consumption.

Vehicle available -
TOYOTA
VIGO 2.5 / 3.0
FORTURNER 2.5 / 3.0
PRADO 120 3.0 1KD
PRADO 150 3.0 1KD
SURF 3.0 1KZ
LAND CRUISER 100 / 200

NISSAN
NAVARA D20
NAVARA D40
PATROL

MITSUBISHI
PAJERO SPORT 2.5
TRITON 2.5 / 3.2

ISUZU
DMAX 3.0 EFI
DMAX 3.0

FORD
RANGER 2.5

LAND ROVER
DISCOVERY 2.5
DEFENDER 2.2 / 2.4
FREELANDER
RANGE ROVER SPORT

PLS CONTACT +60128336623

Tuesday, August 31, 2010

RHINO RACK AUSTRALIA

The Rhino Heavy Duty Product Range is a diverse range of roof racks that come in several different Heavy Duty styles and fitments. This includes gutter mounts, removable pad mounts and vehicle specific track mounts to fit a wide array of vehicles with and without rain gutters. Available with Black or Silver bars, the Heavy Duty range was specifically designed with the professional tradesman and avid 4 wheel driver in mind. Built from light weight quality Australian materials, the leg units are manufactured from a UV Stabilised glass reinforced nylon. The cross bars are extruded structural aluminium, so all heavy duty roof racks are Strong, Durable and ready to work.

The Rhino Heavy Duty range can carry substantial loads and generally has a higher load rating than any other roof rack type. And if your vehicle has a low load rating, don't stress too much, because typically Rhino has been able to increase certain load ratings through a number of methods and by spreading the load over multiple bars. So by using a Rhino Heavy Duty roof rack system your guaranteed to get the maximum load carrying capacity for you vehicle.

Used in conjunction with Rhino Rack's trade & 4wd accessories including ladder racks, alloy trays and platform Racks a Heavy Duty roof rack can offer endless load carrying solutions to make your life easier. So If you're an electrician, Plumber or a Builder and you need to utilise your vehicle's space to carry anything from ladders to pipes, Rhino has you covered. And for the 4wd enthusiast the Rhino Heavy Duty Roof racks are compatible with Rhinos huge 4wd range of accessories that include Alloy trays, High lift jack holders and shovel holders.

So whatever your trade, hobby or profession, get a Heavy Duty Rhino Rack to get the job done.